< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=439253020420552&ev=PageView&noscript=1" />

PROLOGIC SMART SAFE LOCK

QUICK START GUIDE

Enroll New User

On the entrypad:

  1. Press Menu/OK then 1
  2. Login as Administrator or Manager
  3. Enter new code (6 digits) then repeat new code to enroll new user.
Delete User

On the entrypad:

  1. Press Menu/OK then 2
  2. Login as Administrator or Manager
  3. Press ▼ to select the user and press Menu/OK
  4. Press Menu/OK to confirm deletion
You can delete individual users in the SECURAM Smart app. 
Pair Phone

On the entrypad:

  1. Press Menu/OK then Menu/OK again
  2. Login as Administrator or Manager
  3. Press ▼ to find “Pair Phone” and press Menu/OK
  4. Follow the pair process in the SECURAM Smart app.

 

Change Battery

The Prologic Smart safe lock uses a 9V to operate. 

  1. Locate the SureLock battery compartment at the 5 o’clock position of the entrypad. 
  2. Release the latch of the battery compartment by pulling the lever downward.
  3. Pull out the battery compartment and remove the spent 9V battery. 
  4. Install a new 9V battery into the compartment. (The compartment will only receive the battery when the positive and negative terminals are oriented correctly. 
  5. Put the battery compartment back in to the entrypad. Push the latch of the compartment up until it snaps closed.
Unlock

On the entrypad:

  • Enter your code followed by Menu/OK.
    • Example: 1 2 3 4 5 6 -> Menu/OK
  • To mask your code, you can enter up to 9 digits – your 6-digit code plus up to 3 additional digits. 
    • Enter 3-4-1-2-3-4-5-6-7, wher e the 2 masking digits before your code (3-4) and the single masking digit after your code (7) are concealing or masking your actual code.
    • If you enter less than 9 digits, you must always press the Menu/OK button to send the code to the lock.
    • Note: the additional 3 masking digits can be added before and/or after your code.
    • Enter 3-4-1-2-3-4-5-6-7, where the 2 masking digits before your code (3-4) and the single masking digit after your code (7) are concealing or masking your actual code.
    • If you enter less than 9 digits, you must always press the Menu/OK button to send the code to the lock.
    • Note: the additional 3 masking digits can be added before and/or after your code. 

 

  • In the SECURAM app, tap unlock then enter valid code (includes one time access code)
Lock

The ProLogic Smart Safe Lock automatically re-locks after 6 seconds.

Welcome to SECURAM Smart

Sign up for our newsletter and receive 10% off your first order

*Discount may not be combined with any other sale, promotion, discount, code, coupon, or offer.